FREE SAMPLES OF OUR SHED PLANS by Just Sheds Inc.

Thank you for visiting.

Pictured here are a few pages chosen at random to show what our plans and construction guide illustrations look like. They are shown in much smaller and different scales. Our plans and guide come complete showing in great detail the required info needed to build.

SAMPLE OF OUR MATERIAL LIST
NO.	QUAN.	SIZE	DESCRIPTION AND USE	NOTES
1	120	Sq. ft.	Wire mesh
2	11	½”	Anchor bolts
3	2	6” X 6” X 12’	Cedar or pressure treated wood	1,2,3,7
4	16	2”X 8”X 10’	Solid bridging, floor and header joists	1,2,3,7
5	4	4’X 8’ X 5/8”	Tongue and groove plywood	7
6	15	2”X 4”X 16’	When cut will give 1 bottom and 2 top plates for all walls plus misc. needs	1,3,5
7	40	2”X 4”X 92 ½”	Precut wall studs	1,3,5
8	1	2’ X 8” X16’	Lintel over window	1,3
9	13	4’X 8’X 7/16”	Aspenite wall sheeting
10	3	2”X 5”X 14’	Ridge pole plus left and right wall fascia boards	3,4
11	2	2”X 5”X 16’	Front and back wall fascia boards	1,3,4
12	10	2”X 4”X 16’	Roof rafters	1,3,5
13	10	2”X 4”X 10’	Ceiling joist	1,3
14	7	4’X 8’X 3/8”	Spruce plywood roof sheeting
15	42	3/8”	H clips or use scrap wood to support roof sheeting edges
16	210	Sq. ft.	Asphalt roof shingles (includes starter strip and ridge caps )
17	1	8”X 9”	Roof vent with screen
18	2		Andersen window “ NARROLINE # 3456”	6
19	1		Therma-tru door (DOUBLE DOOR) # CS210	6
20	2		Locking door knobs (check with door supplier regarding size, set back etc.)
21	13yy	4’X 8’X 7/16”	Aspenite sheeting, for interior walls and ceiling
22	18 lbs	3 ¼”	Ardox or spiral framing nails	5
23	18 lbs	2”	Ardox or spiral framing nails	5
24	11 lbs	1 1/4”	Roofing nails, use for shingles, asphalt paper, vinyl siding and trim	5
25	430	Sq. ft.	# 15 asphalt paper
26	44	Linear ft.	Vinyl siding starter strip
27	4	¾”X 3”X 10’	Vinyl siding outside corner post
28	120	Linear ft.	J channel
29	58	Linear ft	F channel (wall mounted to hold soffit material)
30	36	Sq. ft.	Vented soffit
31	68	Linear ft.	Under sill trim, use under window and on the top edge of the vinyl fascia
32	68	Linear ft.	6” vinyl fascia
33	16	Linear ft.	Vinyl door and window cap
34	430	Sq. ft.	Double 4” vinyl siding
35	1	15” X 24”	Shutter as shown on page 1
36			Misc. caulking and paint for the doors

NOTE: PLEASE READ ALL NOTES AND SPECIFICATIONS BEFORE ORDERING ANY MATERIALS OR BUILDING

1 When cut in two or to the required size one piece will yield the needed amount.

2 Cedar or pressure treated wood is recommended. Use cut end treatment if treated wood is used.

3 Grade numbers 1 and 2 spruce is the specified lumber for this project.

4 2”X 5” lumber is recommended because it suits the 6” vinyl fascia best.

5 Consider ordering a few more of these items or others as it is common to use more because of working style, waste or mistakes.

6 Always confirm the size of the unit and the rough stud opening (R.S.O.)

7 Delete these items and 26 sq. ft. from no. 34 if you choose to build your shed on a concrete pad.

8 Not knowing your site or soil conditions prevents us from estimating any of your concrete needs.

9 It is the owner’s responsibility to apply for all required permits and to build with the necessary skill and in accordance with all required standards.

Instant download . . buy today . . build tomorrow

You do not need a PayPal account to use your favorite credit card.